- Color ePaper Modules (15)
- Cart Relation (23)
- All (86)
- E Ink Display Kits (7)
- E INK DISPLAY MODULES (33)
- DRIVING BOARD (15)
- Application Zone (32)
FLASH Driving Board
$350.00
The FLASH (NFC driving board) development kit enables you to develop high-performance applications that benefit from ePaper display low-power operation. With NFC wireless charging, it can enhance the product’s feature and consumer appeal at no extra bill-of-materials cost.
The FLASH development kit support NFC to control the driving board and update the display content through a smartphone. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on compatible ePaper display (2.9” LV1932-BJB).
● | 2.9” ePaper display panel is not included in the package. Please make sure you are in possession of compatible 2.9” LV1932-BJB ePaper display panel. Go to compatible display panels.( 2.9” LV1932-BJB) |
● | Due to NFC design between smartphones are different, it may result in sensitivity difference when 2.9” ePaper update image through FLASH kit. Please use compatible smartphone when you operate the FLASH evaluation kit. |
Product Description
Package content
This demo kit contains the following:
- ● FLASH (NFC driving board) 1pcs
SPECIFICATION

Item | Specification |
Outline Dimension | FLASH: 100mm × 50mm × 1.6mm |
Compatibility Table: E Ink Evaluation Kits vs. ePaper Display Module
ePaper Display Handling Notice
View online |
USER MANUAL
FLASH Driving Board View online-
2.9˝ ePaper Display (LV1932-BJB) 【Display Module Only】—【Flexible】
$99.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
LV1932-BJB is a reflective electrophoretic E Ink® technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 300 x 200 pixels. The display is capable of displaying 1-bit black and white full display capabilities. An integrated circuit contains gate buffer, source buffer interface, timing control logic, oscillator, DC-DC, SRAM, LUT, and VCOM are supplied with each panel.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● E Ink will provide FW and sample code as instruction guide. « Optional, NFC driving board to light on LV1932-BJB (with Android phone) »
LV1932-BJB is a reflective electrophoretic E Ink® technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 300 x 200 pixels. The display is capable of displaying 1-bit black and white full display capabilities. The Flash® (NFC driving board) contains NFC IC and micro controller, antenna area to support light on image by NFC.
● FLASH (NFC driving board) ● FLASH (NFC driving board) includes the NFC communication function and the EPD driving function to drive 2.9” EPD display module (LV1932-BJB). ● Use a smartphone (Android OS) that supports NFC to control FLASH and update the display content of LV1932-BJB without the battery and the power supply. ● Using specific apk (NFC 2.9 Inch Ver.21051403.apk) install to smart phone and control FLASH to light on LV1932-BJB. -
2.9˝ ePaper Display (VC2207-BJB)【Display Module Only】—【Flexible】
$99.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
VC2207-BJB is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 2.9” active area with 200 x 300 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. -
HULK Driving Board
$350.00(Tax excl.)Read more...The Hulk development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.
The software design use common industry standard development environment (IAR Integrated Development Environment (IDE))
● No ePaper display panels included in the package. Please make sure you are in possession of one or more HULK compatible ePaper display panels. ● Firmware update is required for the first use and when different display panels are applied to the driving board. ● Firmware programmer (MSP-EXP430G2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (MSP-EXP430G2)