5.65˝ ePaper Display (ED057TC2)【Display Module Only】
$149
« Compatible with E Ink HULK evaluation kit »
ED057TC2 is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 5.65” and contains 600 x 448 pixels. The panel is capable of displaying 1-bit black/white images depending on the associated lookup table used. The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator, DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.
| ● | Please make sure you are in possession of a E Ink HULK Kit. go to HULK |
| ● | Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2) |
Product Description
Features
- ● Highlight Red color
- ● High contrast TFT electrophoretic
- ● 600 x 448 display
- ● High reflectance
- ● Ultra wide viewing angle
- ● Ultra low power consumption
- ● Pure reflective mode
- ● Bi-stable
- ● Commercial temperature range
- ● Low current sleep mode
- ● On chip display RAM
- ● Serial Peripheral Interface available
- ● External SPI flash/eeprom for waveform
- ● On-chip oscillator
- ● On-chip booster and regulator control for generating Vcom, Gate and Source driving voltage
- ● I2C Signal Master Interface to read external temperature sensor
Package content
- ● 5.65˝ ePaper Display (ED057TC2)
SPECIFICATION
| Parameter | Specifications | Unit | Remark |
| Screen Size | 5.65 | Inch | |
| Display Resolution | 600 (H) × 448 (V) | Pixel | Dpi: 132 |
| Active Area | 114.9 (H ) × 85.8 (V) | mm | |
| Pixel Pitch | 191.5 (H) × 191.5 (V) | mm | |
| Pixel Configuration | Square | ||
| Outline Dimension | 125.4 (H) × 99.5 (V) × 1.15 (D) | mm | Without protective film |
| Module Weight | 28±2.8 | g | |
| Number of Gray | Black and White with | ||
| Display Operating Mode | Reflective mode |
Compatibility Table: E Ink Evaluation Kits vs. ePaper Display Module
USER MANUAL
5.65˝ ePaper Display (ED057TC2) View online-
Read more...« Compatible with E Ink HULK evaluation kit »
EL029TR1 is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 296 x 128 pixels. The panel is capable of displaying 1-bit black, white and red images depending on the associated lookup table used.
The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator,DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2) -
Read more...The Hulk development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.
The software design use common industry standard development environment (IAR Integrated Development Environment (IDE))
● No ePaper display panels included in the package. Please make sure you are in possession of one or more HULK compatible ePaper display panels. ● Firmware update is required for the first use and when different display panels are applied to the driving board. ● Firmware programmer (MSP-EXP430G2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (MSP-EXP430G2) -
Read more...« Compatible with E Ink HULK evaluation kit »
ED057TC6 is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 5.65” and contains 600 x 448 pixels. The panel is capable of displaying 1-bit black, white and red images depending on the associated lookup table used. The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator, DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)