1.27˝ ePaper Display (ED013TC1)【Display Module Only】
$99.00
« Compatible with E Ink HULK evaluation kit »
ED013TC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 1.27” active area with 128×256 pixels, the display is capable to display images at 2 gray levels (1 bit) depending on the display controller and the associated waveform file it used.
| ● | Please make sure you are in possession of a E Ink HULK Kit. go to HULK |
| ● | Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2) |
Product Description
Features
- ● High contrast reflective/electrophoretic technology
- ● 128×256 resolution
- ● High reflectance
- ● Ultra wide viewing angle
- ● Pure reflective mode
- ● Bi-stable
- ● Ultra low power consumption
- ● SPI interface
- ● Glass substrate
Package content
- ● 1.27˝ ePaper Display (ED013TC1)
- ● Adapter FPC
SPECIFICATION
| Parameter | Specifications | Unit | Remark |
| Screen Size | 1.27 | Inch | |
| Backplane Type | Glass | ||
| Display Resolution | 128 (H) × 256(V) | Pixel | |
| Active Area | 14.464 × 28.928 | mm | |
| Pixel Pitch | 0.113(H) × 0.113(V) | mm | |
| Pixel Configuration | Rectangle | ||
| Outline Dimension | 18.7(W) × 39.8(H) × 0.96(D) | mm | |
| Module Weight | 1.55±0.16 | g | Without mask film |
| Number of Gray | 2 | ||
| Display Operating Mode | Reflective mode |
Compatibility Table: E Ink Evaluation Kits vs. ePaper Display Module
ePaper Display Handling Notice
| View online |
USER MANUAL
1.27˝ ePaper Display (ED013TC1) View online-
Read more...The Hulk development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.
The software design use common industry standard development environment (IAR Integrated Development Environment (IDE))
● No ePaper display panels included in the package. Please make sure you are in possession of one or more HULK compatible ePaper display panels. ● Firmware update is required for the first use and when different display panels are applied to the driving board. ● Firmware programmer (MSP-EXP430G2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (MSP-EXP430G2) -
Read more...« Compatible with E Ink HULK evaluation kit »
ET011TT2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)