Showing 1-12 of 33 results

  • « Compatible with E Ink HULK evaluation kit »

    ET011TJ2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used. A central hole is in the center of display.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware.

     

  • « Compatible with E Ink HULK evaluation kit »

    ET011TT2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware.

     

  • « Compatible with E Ink HULK evaluation kit »

    ED013TC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 1.27” active area with 128×256 pixels, the display is capable to display images at 2 gray levels (1 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
  • « Compatible with E Ink Hulk evaluation kit »

    EB2000-AFA is a 1.64-inch color (E Ink Spectra 3100TM ), reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It offers 4 colors of black, white, yellow and red images.

    E Ink Spectra 3100, bright and saturated color combinations contributed by 4 –Pigments system for creative promotion and faster update time, wide temperature range to accommodate more needs. High resolution (144 ppi) to display more content to attract consumer’s attention.

    By applying EB2000-AFA with Hulk development kit enables you to develop innovative applications that benefit from low-power consumption of ePaper displays. It features simple installation and quick tryout for the desired applications. One can use development kit to load and view custom images on E Ink display with a PC or a laptop. Learn more about Hulk driving board.

    This model is suitable for the applications of ESL.

     

    Please be noted:

    Driving board is not included in the display module package. Please purchase a Hulk driving board package for EB2000-AFA
  • « Compatible with E Ink ICE evaluation kit »

    VB3300-KCA is a reflective electrophoretic E Ink® and Mobius technology display module based on active matrix TFT substrate. It has 10.3” active area with 1404 x 1872 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    This display module doesn’t contain a touch panel.

    Please Note: Driving boards are not included in the display module package. Three versions firmware had been developed with ICE board to support this module.

    Please follow the ordering steps in order for us to prepare your evaluation kit correctly.

    This is your first time purchasing this display panel module

    Step 1: You need to purchase a driving board. Learn and order your driving boards, please go to E Ink ICE kit ( go to ICE  )

    Step 2: While you are placing order for your ICE driving board, please select the display module size you would like to purchase from the drop-down list on the bottom of  ICE board webpage  before placed it in Shopping Cart.

    Step 3: After placing ICE board in Shopping Cart, return to this webpage and select the ICE board with the correct firmware version (number in the bracket) from the drop-down list that matches the ICE board you just placed in the Shopping Cart.

    You are already in possession of an E Ink ICE kit, only want to purchase a display panel module

    Please select the ICE board with correct firmware version (number in the bracket) which you are in possession with from the Driving Board drop-down list below. This will help us to prepare your display panel module with the correct firmware.

     

     

  • « Compatible with E Ink ICE evaluation kit »

    VB3300-NCB is a reflective electrophoretic E Ink® technology display module based on active matrix TFT substrate. It has 13.3” active area with 1600 x 1200 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file.

    This display module doesn’t contain a touch panel.

    Please Note: Driving boards are not included in the display module package. Three versions firmware had been developed with ICE board to support this module.

    Please follow the ordering steps in order for us to prepare your evaluation kit correctly.

    This is your first time purchasing this display panel module

    Step 1: You need to purchase a driving board. Learn and order your driving boards, please go to E Ink ICE kit ( go to ICE  )

    Step 2: While you are placing order for your ICE driving board, please select the display module size you would like to purchase from the drop-down list on the bottom of  ICE board webpage  before placed it in Shopping Cart.

    Step 3: After placing ICE board in Shopping Cart, return to this webpage and select the ICE board with the correct firmware version (number in the bracket) from the drop-down list that matches the ICE board you just placed in the Shopping Cart.

    You are already in possession of an E Ink ICE kit, only want to purchase a display panel module

    Please select the ICE board with correct firmware version (number in the bracket) which you are in possession with from the Driving Board drop-down list below. This will help us to prepare your display panel module with the correct firmware.

     

  • « Compatible with E Ink Hulk evaluation kit »

    EB2000-BDA is a 2.36-inch color (E Ink Spectra 3100TM ), reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It offers 4 colors of black, white, yellow and red images.

    E Ink Spectra 3100, bright and saturated color combinations contributed by 4 –Pigments system for creative promotion and faster update time, wide temperature range to accommodate more needs. High resolution (144 ppi) to display more content to attract consumer’s attention.

    By applying EB2000-BDA with Hulk development kit enables you to develop innovative applications that benefit from low-power consumption of ePaper displays. It features simple installation and quick tryout for the desired applications. One can use development kit to load and view custom images on E Ink display with a PC or a laptop. Learn more about Hulk driving board.

    This model is suitable for the applications of ESL.

     

    Please be noted:

    Driving board is not included in the display module package. Please purchase a Hulk driving board package for EB2000-BDA
  • « Compatible with E Ink Arduino evaluation kit »

    EA2220-BJC is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black and white and red content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.

    By applying EA2220-BJC with Arduino development kit enables you to develop innovative applications that benefit from low-power consumption of ePaper displays. It features simple installation and quick tryout for the desired applications. One can use development kit to load and view custom images on E Ink display with a PC or a laptop. Learn more about Arduino driving board.

    This model is suitable for the applications of ESL..

    Driving board is not included in the display module package. Please purchase a Arduino or Hulk driving board package.

    Go to Arduino    Go to Hulk

  • « Compatible with E Ink HULK evaluation kit »

    LV1932-BJB is a reflective electrophoretic E Ink® technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 300 x 200 pixels. The display is capable of displaying 1-bit black and white full display capabilities. An integrated circuit contains gate buffer, source buffer interface, timing control logic, oscillator, DC-DC, SRAM, LUT, and VCOM are supplied with each panel.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    E Ink will provide FW and sample code as instruction guide.

     

    « Optional, NFC driving board to light on LV1932-BJB (with Android phone) »

    LV1932-BJB is a reflective electrophoretic E Ink® technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 300 x 200 pixels. The display is capable of displaying 1-bit black and white full display capabilities. The Flash® (NFC driving board) contains NFC IC and micro controller, antenna area to support light on image by NFC.

    FLASH (NFC driving board)
    FLASH (NFC driving board) includes the NFC communication function and the EPD driving function to drive 2.9” EPD display module (LV1932-BJB).
    Use a smartphone (Android OS) that supports NFC to control FLASH and update the display content of LV1932-BJB without the battery and the power supply.
    Using specific apk (NFC 2.9 Inch Ver.21051403.apk) install to smart phone and control FLASH to light on LV1932-BJB.
  • « Compatible with E Ink HULK evaluation kit »

    VC2207-BJA is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black and white content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware.

     

  • « Compatible with E Ink HULK evaluation kit »

    VC2207-BJB is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 2.9” active area with 200 x 300 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware.

     

  • Pre Order

    Shipping Date : 7th Apr. 2022

    « Compatible with E Ink Luvia evaluation kit »

    EB2000-PEA is a reflective electrophoretic E Ink® Spectra 3100 technology display module based on active matrix TFT substrate. The diagonal length of active area is 25.3” and contains 3200 x 1800 pixels. The display is capable to display black, white, red and yellow images depending on the display controller and the associated lookup table used.

    Please be noted:

    Driving boards are not included in the display module package. E Ink Luvia kit is designed to support this module ( go to Luvia ).
    Notice: Due to this module is belong to large size module, it is easy to be damaged during handling process. please refer handling notice to avoid module damage ( go to handling notice )