Plastic Logic 3.1″ flexible ePaper display (700524)【Display Module Only】—【Flexible】
$125
« Compatible with Parrot MSP430 evaluation kit »
The 3.1″ Lectum display is a flexible active-matrix EPD with Ultrachip UC8156 single chip EPD controller, integrated drivers and power management. It supports 312 x 74 pixels.
This display is particularly suitable for smart cards, wearables and labels.
Please make sure you are in possession of a Parrot MSP430 kit. Go to Parrot MSP430 Evaluation Kit
Product Description
Features
- ● Organic TFT active matrix incorporating industry leading, bi-stable electrophoretic display technology.
- ● Integrated display driver with controller and PMIC based on COP (chip-on-plastic) backend technology.
- ● Host communication via SPI interface.
- ● On-chip display RAM and waveform memory available.
- ● I2C interface for reading external temperature sensor.
- ● Thin, formable, robust, lightweight.
- ● Ultra-wide viewing angle.
- ● Ultra-low power – no continuous refresh cycles required.
- ● Single voltage power supply (1.7…3.6V), on-chip regulator control for generating driving voltages (external booster circuit required)
- ● Low current deep sleep mode.
- ● Can be combined with third-party touch solutions.
SPECIFICATION
| Parameter | Specifications | Unit |
| Screen Size | 3.1 | Inch |
| Backplane Type | Organic TFT active matrix | |
| Display Resolution | 312 (H) × 74 (V) | Pixel |
| Active Area | 75.5 (H) × 17.91 (V) mm | mm |
| Pixel Pitch | 242 | µm |
| Pixel Configuration | Square | |
| Outline Dimension | 79.6 (H) × 36.34 (V) × 0.48 (D) mm (without FPC), 85.0 (H) × 39.04 (V) mm × 0.48 (D) (with FPC) | mm |
| Module Weight | 2.2 | g |
| Display Operating Mode | Reflective mode |
Compatibility Table: PLG Evaluation Kits vs. ePaper Display Module
USER MANUAL
Plastic Logic 3.1" flexible ePaper display (700524)【Display Module Only】—【Flexible】- Display Datasheet 700524 3.1__1 View online
-
Read more...« Compatible with Parrot MSP430 or Beaglebone evaluation kits »
The 4.0″ Lectum display is a flexible active-matrix EPD with Ultrachip UC8156 single chip EPD controller, integrated drivers and power management. It supports 400 x 240 pixels.
This display is particularly suitable for smart cards, wearables and labels.
Please make sure you are in possession of either a Parrot MSP430U or Beaglebone kit.
Go to Parrot MSP430 Evaluation Kit
Go to Beaglebone Evaluation Kit -
Read more...« Compatible with Parrot MSP430 evaluation kit »
The 3.1″ Lectum display is a flexible active-matrix EPD with Ultrachip UC8156 single chip EPD controller, integrated drivers and power management. It supports 312 x 74 pixels.
This display is particularly suitable for smart cards, wearables and labels.
Please make sure you are in possession of a Parrot MSP430 kit. Go to Parrot MSP430 Evaluation Kit
-
Read more...MSP430-Kit, suited for ultra low power applications and repeated low-performance tasks with short start-up time such as IOT, wearables, small labels and smartcards.
The MCU TI MSP430F5438A is a hard-coded microcontroller unit, and code changes require a dedicated JTAG programmer.
The kit includes the MCU board Parrot and all other components required to operate different display sizes.
The display sizes suported are 1.1″, 1.38″, 2.1″, 3.1″, 4″, 4.9″, 4.7″ and 10.7″.The Parrot evaluation kit is pre-configured to drive the display type chosen, enabling a swift, trouble free setup. In use, the kit allows you to test loading and viewing custom images onto your chosen display.
No ePaper display panels included int the package. please make sure you are in possession of a compatible Plastic Logic display. Go to Parrot MSP430 compatible display panels
* Please ensure that you select the display type being used with this kit prior to order. Different components may be applicable depending on requirements.