EVK – Ultra Low Power TCM2 driver Evaluation Kit for E Ink 9.7” B/W ED097CT2 – no display
The MpicoSys TCM2_E97 development kit enables low power applications that make the most of the low-power operation of the E Ink 9.7” display, allowing battery operated products. Power consumption can be as low as 76 mJ for a quality 2 bit update.
The kit consists of TCM board, USB2TCM interface, Micro-USB cable and 2 hours of specialistic design-in support (planned).
MpicoSys TCM2_97 driving kit is dedicated for driving ED097CT2 display module.
- ● TCM board
- ● USB2TCM interface
- ● Micro-USB cable
- ● 2 hours of specialistic design-in support (planned, EU hours)
|Processor||STM32F446RET6 ARM®Cortex®-M4 180 MHz|
|EPDC||MpicoSys proprietary integrated controller|
|SRAM Memory||128 KB|
|Gray Level||2 bits|
|Image format||EPD, DLZ|
|Demo Function||USB2TCM interface|
|Power Input||Pin header, 2.7-3.6 VDC|
|Typical Energy consumption per single image upload/update during 1 sec||TCM2_E97|
|Flashless, 1bit||61 mJ|
|Quality, 2 bit||76 mJ|
ePaper Display Handling Notice