Atelier with 13.3˝ E Ink Gallery™ Plus Display (AC133UT1) —【Glass】
$799.00
Purchase of E Ink Gallery related products requires signing a Non-disclosure agreement (NDA) & Software License (SLA) before shipment. Please click on “Contact Sales” below to order your kit.
Atelier with an 13.3” E Ink Gallery Plus display (AC133UT1) demo kit allows E Ink clients to access the hardware and software of 13.3” E Ink Gallery Plus display module for evaluation. This kit is a turnkey solution for those who are interested in designing with E Ink displays. Hardware and software design support is available from E Ink directly.
13.3” E Ink Gallery Plus display is suitable for various applications, e.g. Artwork, Signage, Retail, etc…
E Ink launched the next generation – E Ink Gallery™ Plus in 2022. This full color ePaper module, has a color gamut ideally reaching 60,000, an improvement over the earlier generations. The contrast ratio is improved by 40%, from 10 to 14, providing a more impactful visual experience.
| ● | The kit does not include an MCU driving board Raspberry Pi #3. Please purchase from Here |
Out of stock
Product Description
Why should you choose Atelier with 13.3” display
- ● Accelerated design-in process of color ePaper
- ● Cost effective lay-out design as reference
- ● End-products adopt features of E Ink display, such as always-on, low power consumption, sunlight readability, etc.
- ● Suitable for applications such as signage and retail market
- ● Hardware and software support from E Ink directly
What Atelier with 13.3” display can do for you
- ● Demonstrate as a turn-key solution
● Hands-on experiment with Raspberry Pi #3
● Loading and viewing custom images on 13.3” E Ink display
● Easy tryout on applications desired
Features
- ● 13.3” E Ink Gallery™ Plus display
● All-in-one IC include Drive、TCON、PMIC and Temp Sensor
● Full reference design support directly from E Ink
Package content
This demo kit contains the following:
- ● Atelier with 13.3˝ E Ink Gallery™ Plus Display (AC133UT1)
- ● Adapters
- ● Micro USB cable
- ● SD card
Notice
Kit does not include MCU driving board Raspberry Pi #3. Please purchase from Here
SPECIFICATION
| Item | Specification |
| MCU | Raspberry Pi #3 |
| TCON Solution | Hardware TCON |
| E Ink Display Panel | |
| Outline Dimension | 285.80(W) × 213.65(H) × 0.993(D) (W/PF) 285.80(W) × 213.65(H) × 0.953(D) (W/O PF) |
| Shape | Rectangular |
| Backplane Type | Glass |
| Resolution | 1600 (H) × 1200(V) |
| Operating Temperature | 15~35 degree |
| Controller Board | |
| Outline Dimension | Tcon board: 50mm x100mm TS board: 27mmx14.4mm FFC: 10cm |
| Input | 5Vdc (USB), power on when con |
| RAM | Embedded 64MB |
| Flash Memory | External 16MB |
| Operating Temperature | 0~40 degree |
- ● All hardware specifications are for the demonstration of this evaluation kit only.
ePaper Display Handling Notice
| View online |
Compatibility Table: E Ink Evaluation Kits vs. ePaper Display Module
USER MANUAL
Atelier with 13.3˝ E Ink Gallery™ Plus Display (AC133UT1) —【Glass】 View online Quick start guide for 13.3˝ E Ink Gallery™ Plus EVK View online-
Read more...Salt allows E Ink clients to access the hardware and software of E Ink’s 31.2”, 42” ePaper display module for evaluation. This kit demonstrates as a turnkey solution for those who are interested in designing with E Ink displays. Hardware and software design support is available from E Ink directly.
● Shipping date: End of December start delivery (Based on First in, first out Policy) -
Read more...« Compatible with E Ink ICE evaluation kit »
VB3300-NCB is a reflective electrophoretic E Ink® technology display module based on active matrix TFT substrate. It has 13.3” active area with 1600 x 1200 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file.
This display module doesn’t contain a touch panel.
Please Note: Driving boards are not included in the display module package. Three versions firmware had been developed with ICE board to support this module.
Please follow the ordering steps in order for us to prepare your evaluation kit correctly.
● This is your first time purchasing this display panel module Step 1: You need to purchase a driving board. Learn and order your driving boards, please go to E Ink ICE kit ( go to ICE )
Step 2: While you are placing order for your ICE driving board, please select the display module size you would like to purchase from the drop-down list on the bottom of ICE board webpage before placed it in Shopping Cart.
Step 3: After placing ICE board in Shopping Cart, return to this webpage and select the ICE board with the correct firmware version (number in the bracket) from the drop-down list that matches the ICE board you just placed in the Shopping Cart.
● You are already in possession of an E Ink ICE kit, only want to purchase a display panel module Please select the ICE board with correct firmware version (number in the bracket) which you are in possession with from the Driving Board drop-down list below. This will help us to prepare your display panel module with the correct firmware.