2.9˝ ePaper Display (LV1932-BJB) 【Display Module Only】—【Flexible】
$99.00
« Compatible with E Ink HULK evaluation kit »
LV1932-BJB is a reflective electrophoretic E Ink® technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 300 x 200 pixels. The display is capable of displaying 1-bit black and white full display capabilities. An integrated circuit contains gate buffer, source buffer interface, timing control logic, oscillator, DC-DC, SRAM, LUT, and VCOM are supplied with each panel.
| ● | Please make sure you are in possession of a E Ink HULK Kit. go to HULK |
| ● | E Ink will provide FW and sample code as instruction guide. |
« Optional, NFC driving board to light on LV1932-BJB (with Android phone) »
LV1932-BJB is a reflective electrophoretic E Ink® technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 300 x 200 pixels. The display is capable of displaying 1-bit black and white full display capabilities. The Flash® (NFC driving board) contains NFC IC and micro controller, antenna area to support light on image by NFC.
| ● | FLASH (NFC driving board) |
| ● | FLASH (NFC driving board) includes the NFC communication function and the EPD driving function to drive 2.9” EPD display module (LV1932-BJB). |
| ● | Use a smartphone (Android OS) that supports NFC to control FLASH and update the display content of LV1932-BJB without the battery and the power supply. |
| ● | Using specific apk (NFC 2.9 Inch Ver.21051403.apk) install to smart phone and control FLASH to light on LV1932-BJB. |
Product Description
Features
- ● Low Voltage
- ● Ultra wide viewing angle
- ● Ultra low power consumption
- ● Pure reflective mode
- ● Bi-stable
- ● Commercial temperature range (0°C~40°C)
- ● Portrait mode
- ● Antiglare hard-coated front-surface
- ● Low current deep sleep mode
- ● On chip display RAM
- ● Waveform stored in On-chip OTP
- ● Serial peripheral interface available
- ● On-chip oscillator
- ● On-chip booster and regulator control for generating VCOM, Gate and source driving voltage
- ● I2C Signal Master Interface to read external temperature sensor
- ● Available in COG package IC thickness 280um
Package content
- ● 2.9˝ ePaper Display (EU029TC1)
- ● PCBa board for light it on will separate by another purchasing item.
SPECIFICATION
| Parameter | Specifications | Unit | Remark |
| Screen Size | 2.9 | Inch | |
| Display Resolution | 200 (H) × 300(V) | Pixel | DPI: 124 |
| Active Area | 61.50 (H) × 41.00 (V) | mm | |
| Pixel Pitch | 0.205 (H) × 0.205 (V) | mm | |
| Pixel Configuration | Square | ||
| Outline Dimension | 50.2 2(W) × 80.2 (H) × 0.77 (D) | mm | Without masking film |
| Module Weight | 4.07g+0.41g | g |
Compatibility Table: E Ink Evaluation Kits vs. ePaper Display Module
ePaper Display Handling Notice
| View online |
USER MANUAL
| Quick start guide for HULK 2.9˝ View online |
| Quick start guide for FLASH 2.9˝ View online |
-
Read more...The Hulk development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.
The software design use common industry standard development environment (IAR Integrated Development Environment (IDE))
● No ePaper display panels included in the package. Please make sure you are in possession of one or more HULK compatible ePaper display panels. ● Firmware update is required for the first use and when different display panels are applied to the driving board. ● Firmware programmer (MSP-EXP430G2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (MSP-EXP430G2) -
Read more...« Compatible with E Ink HULK evaluation kit »
VC2207-BJA is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black and white content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. -
Read more...« Compatible with E Ink HULK evaluation kit »
VC2207-BJB is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 2.9” active area with 200 x 300 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware.