2.9˝ ePaper Display (VC2207-BJB)【Display Module Only】—【Flexible】
$99.00
« Compatible with E Ink HULK evaluation kit »
VC2207-BJB is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 2.9” active area with 200 x 300 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.
| ● | Please make sure you are in possession of a E Ink HULK Kit. go to HULK |
| ● | Firmware programmer (MSP-EXP430G2) kit is required to update firmware. |
Product Description
Features
- ● High contrast TFT electrophoretic
- ● Plastic substrate
- ● 200 x 300 display
- ● High reflectance
- ● Ultra wide viewing angle
- ● Pure reflective mode
- ● Bi-stable
- ● Ultra low power consumption
- ● Landscape, Portrait mode
- ● All-in-one IC include Drive、TCON、PMIC and Temp Sensor
Package content
- ● 2.9˝ ePaper Display(VC2207-BJB)
SPECIFICATION
| Parameter | Specifications | Unit |
| Screen Size | 2.9 | Inch |
| Backplane Type | Plastic | |
| Display Resolution | 200 (H) × 300(V) | Pixel |
| Active Area | 61.50 (H) × 41.00 (V) | mm |
| Pixel Pitch | 0.205 (H) × 0.205 (V) | mm |
| Pixel Configuration | Square | |
| Outline Dimension | 50.2 2(W) × 80.2 (H) × 0.741 (D) | mm |
| Module Weight | 3.25±0.3 | g |
| Number of Gray | 2 gray levels (1 bit) (monochrome) | |
| Display Operating Mode | Reflective mode |
Compatibility Table: E Ink Evaluation Kits vs. ePaper Display Module
ePaper Display Handling Notice
| View online |
USER MANUAL
| 2.9˝ ePaper Display (VC2207-BJB)【Display Module Only】—【Flexible】View online |
-
Read more...The Hulk development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.
The software design use common industry standard development environment (IAR Integrated Development Environment (IDE))
● No ePaper display panels included in the package. Please make sure you are in possession of one or more HULK compatible ePaper display panels. ● Firmware update is required for the first use and when different display panels are applied to the driving board. ● Firmware programmer (MSP-EXP430G2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (MSP-EXP430G2) -
Read more...« Compatible with E Ink HULK evaluation kit »
VC2207-BJA is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black and white content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware.
https://shopkits.eink.com/product/luvia-with-25-3%cb%9d-acep-display-ac253tt1-%e3%80%90glass%e3%80%91/