2.9˝ ePaper Display (EA2220-BJC)【Display Module Only】
$99.00
« Compatible with E Ink Arduino evaluation kit »
EA2220-BJC is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black and white and red content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.
By applying EA2220-BJC with Arduino development kit enables you to develop innovative applications that benefit from low-power consumption of ePaper displays. It features simple installation and quick tryout for the desired applications. One can use development kit to load and view custom images on E Ink display with a PC or a laptop. Learn more about Arduino driving board.
This model is suitable for the applications of ESL..
| ● | Driving board is not included in the display module package. Please purchase a Arduino or Hulk driving board package. |
Product Description
Features
- ● Highlight Red color
- ● High contrast
- ● High reflectance
- ● Ultra wide viewing angle
- ● Ultra low power consumption
- ● Pure reflective mode
- ● Bi-stable
- ● Commercial temperature range
- ● Landscape, portrait mode
- ● Antiglare hard-coated front-surface
- ● Low current deep sleep mode
- ● On chip display RAM
- ● Waveform stored in On-chip OTP
- ● Serial peripheral interface available
- ● On-chip oscillator
- ● On-chip booster and regulator control for generating VCOM, Gate and source driving voltage
- ● I2C Signal Master Interface to read external temperature sensor
- ● Available in COG package
Package content
- ● 2.9˝ ePaper Display (EA2220-BJC)
SPECIFICATION
| Parameter | Specifications | Unit | Remark |
| Screen Size | 2.9 | Inch | |
| Display Resolution | 296(H)×128(V) | Pixel | Dpi: 112 |
| Active Area | 66.9(H)×29.06(V) | mm | |
| Pixel Pitch | 0.227(H)×0.226(V) | mm | |
| Pixel Configuration | Rectangle | ||
| Outline Dimension | 79.0(H)×36.7(V) ×0.91(D) | mm | without masking film |
| Module Weight | 5.03±0.5 | g | |
| Number of Gray | Black, White and High Red | ||
| Display Operating Mode | Reflective mode |
ePaper Display Handling Notice
| View online |
Additional Information
| DRIVING BOARD | 2.9˝ with Arduino Board (EA2220-BJC_0175-10290002), 2.9˝ with Hulk Board (EA2220-BJC_0174-10000001) |
|---|
USER MANUAL
| 2.9˝ ePaper Display (EA2220-BJC)【Display Module Only】View online |
-
Read more...The Hulk development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.
The software design use common industry standard development environment (IAR Integrated Development Environment (IDE))
● No ePaper display panels included in the package. Please make sure you are in possession of one or more HULK compatible ePaper display panels. ● Firmware update is required for the first use and when different display panels are applied to the driving board. ● Firmware programmer (MSP-EXP430G2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (MSP-EXP430G2) -
Read more...« Compatible with E Ink HULK evaluation kit »
VC2207-EGA is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 5.65” and contains 600 x 448 pixels. The panel is capable of displaying 1-bit black/white images depending on the associated lookup table used. The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator, DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. -
Read more...« Compatible with E Ink HULK evaluation kit »
VC2207-BJA is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black and white content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware.