2˝ ePaper Display (ED020OC5)【Display Module Only】
$99
« Compatible with E Ink HULK evaluation kit »
ED020OC5 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2” active area with 94 x 230 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.
| ● | Please make sure you are in possession of a E Ink HULK Kit. go to HULK |
| ● | Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2) |
Product Description
Features
- ● High contrast TFT electrophoretic
- ● 94×230 display
- ● High reflectance
- ● Ultra wide viewing angle
- ● Pure reflective mode
- ● Bi-stable
- ● Ultra low power consumption
- ● Landscape, Portrait mode
- ● All-in-one IC include Drive、TCON、PMIC and Temp Sensor
- ● Glass substrate
Package content
- ● 2˝ ePaper Display(ED020OC5)
SPECIFICATION
| Parameter | Specifications | Unit |
| Screen Size | 2 | Inch |
| Backplane Type | Glass | |
| Display Resolution | 94 (H) × 230(V) | Pixel |
| Active Area | 19.22(H) × 47.03(V) | mm |
| Pixel Pitch | 0.2045(H) × 0.2045(V) | mm |
| Pixel Configuration | Square | |
| Outline Dimension | 29.2(W) × 59.5(H) × 0.84(D) | mm |
| Module Weight | 4±0.4 | g |
| Number of Gray | 2 gray levels(1 bit) (monochrome) | |
| Display Operating Mode | Reflective mode |
Compatibility Table: E Ink Evaluation Kits vs. ePaper Display Module
-
Read more...The Hulk development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.
The software design use common industry standard development environment (IAR Integrated Development Environment (IDE))
● No ePaper display panels included in the package. Please make sure you are in possession of one or more HULK compatible ePaper display panels. ● Firmware update is required for the first use and when different display panels are applied to the driving board. ● Firmware programmer (MSP-EXP430G2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (MSP-EXP430G2) -
Read more...« Compatible with E Ink HULK evaluation kit »
ET029TC1 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 2.9” active area with 200 x 300 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2) -
Read more...« Compatible with E Ink HULK evaluation kit »
ED020OC4 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.0” active area with 94 x 230 pixels, and the display is capable to display images with black, white, and red content depending on the display controller and the associated waveform file it used.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)