- Color ePaper Modules (5)
- Cart Relation (17)
- All (71)
- E Ink Display Kits (9)
- E INK DISPLAY MODULES (30)
- DRIVING BOARD (10)
- Application Zone (23)
1.1˝ Round ePaper Display (ET011TT3) 【Display Module Only】 — 【Flexible】
$99.00
« Compatible with E Ink HULK evaluation kit »
E Ink 1.1” round with central hole display (ET011TT3) is a reflective electrophoretic display module driven by active matrix TFT on plastic substrate. 1.1” active area size with 240 x 240 pixels, the display is capable of displaying images with 4 gray levels (2 bits) depending on the display controller and the associated waveform file used.
● | Please make sure you are in possession of a E Ink HULK Kit. go to HULK |
● | Firmware programmer (MSP-EXP430G2) kit is required to update firmware. |
Product Description
Features
- ●High contrast reflective/electrophoretic technology
- ●240×240 display
- ●High reflectance
- ●Ultra wide viewing angle
- ●Pure reflective mode
- ●Bi-stable
- ●Commercial temperature range (Operating Temp. Range 0-50°C)
- ●Plastic substrate
- ●Central hole
Package content
- ●1.1˝ Round with Central Hole ePaper Display (ET011TT3)
- ● Adapter FPC
SPECIFICATION
Parameter | Specifications | Unit |
Screen Size | 1.1 | Inch |
Backplane Type | Plastic | |
Display Resolution | 240 (H) × 240(V) | Pixel |
Active Area | ∅27.96 | mm |
Pixel Pitch | 116.5(H) × 116.5(V) | μm |
Pixel Configuration | Rectangle | |
Outline Dimension | 31.8(W) × 34.6(H) × 0.55(D) (W/PF) 31.8(W) × 34.6(H) × 0.45(D) (W/O PF) | mm |
Module Weight | 0.65±0.065 g | g |
Number of Gray | 4 | |
Display Operating Mode | Reflective mode |
Compatibility Table: E Ink Evaluation Kits vs. ePaper Display Module
ePaper Display Handling Notice
View online |
-
1.1˝ Round ePaper Display (ET011TT2)【Display Module Only】—【Flexible】
$99.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
ET011TT2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. -
HULK Driving Board
$350.00(Tax excl.)Read more...The Hulk development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.
The software design use common industry standard development environment (IAR Integrated Development Environment (IDE))
● No ePaper display panels included in the package. Please make sure you are in possession of one or more HULK compatible ePaper display panels. ● Firmware update is required for the first use and when different display panels are applied to the driving board. ● Firmware programmer (MSP-EXP430G2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (MSP-EXP430G2) -
1.1˝ Round ePaper Display (ET011TJ2)【Display Module Only】
$99.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
ET011TJ2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used. A central hole is in the center of display.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware.