- Color ePaper Modules (6)
- Cart Relation (18)
- All (72)
- E Ink Display Kits (9)
- E INK DISPLAY MODULES (31)
- DRIVING BOARD (10)
- Application Zone (23)
Showing 1-12 of 18 results
-
1.1˝ Round ePaper Display (ET011TJ2)【Display Module Only】
$99.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
ET011TJ2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used. A central hole is in the center of display.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. -
1.1˝ Round ePaper Display (ET011TT2)【Display Module Only】—【Flexible】
$99.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
ET011TT2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. -
10.3˝ ePaper Display [VB3300-KCA]【Display Module Only】
$349.00(Tax excl.)Read more...« Compatible with E Ink ICE evaluation kit »
VB3300-KCA is a reflective electrophoretic E Ink® and Mobius technology display module based on active matrix TFT substrate. It has 10.3” active area with 1404 x 1872 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.
The display module doesn’t contain a touch panel.Three ICE board generations are developed to support this module
● If you are already in possession of an E Ink ICE kit, please select your driving board information below for us to deliver EPD equipped with right FW ● If you are the first time to buy this evaluation kit. please make sure you are in possession of an E Ink ICE Kit. go to ICE -
2.9˝ ePaper Display (EA2220-BJA)【Display Module Only】
$99.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
EA2220-BJA is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 296 x 128 pixels. The panel is capable of displaying 1-bit black, white and red images depending on the associated lookup table used.
The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator,DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. -
2.9˝ ePaper Display (LV1932-BJB) 【Display Module Only】—【Flexible】
$99.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
LV1932-BJB is a reflective electrophoretic E Ink® technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 300 x 200 pixels. The display is capable of displaying 1-bit black and white full display capabilities. An integrated circuit contains gate buffer, source buffer interface, timing control logic, oscillator, DC-DC, SRAM, LUT, and VCOM are supplied with each panel.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● E Ink will provide FW and sample code as instruction guide. -
2.9˝ ePaper Display (VC2207-BJA)【Display Module Only】
$99.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
VC2207-BJA is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black and white content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. -
2.9˝ ePaper Display (VC2207-BJB)【Display Module Only】—【Flexible】
$99.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
VC2207-BJB is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 2.9” active area with 200 x 300 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. -
31.2˝ monochrome ePaper Display [VA3200-QAA]【Display Module Only】
$1,500.00(Tax excl.)Read more...VA3200-QAA is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 31.2” active area with 2560 x 1440 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.
Three kinds of kit are developed to support this module
● If you are already in possession of an E Ink Salt or LVDS kit, please select your kit information below for us to deliver EPD equipped with right FW ● If you are the first time to buy this evaluation kit.
please make sure you are in possession of an E Ink Salt kit ( go to Salt ) or LVDS kit ( go to LVDS )Notice:
Due to size limitation of module, please refer handling notice to avoid module damage ( go to handling notice ) -
4.05˝ ePaper Display [VA3200-DOA]【Display Module Only】
$99.00(Tax excl.)Read more...« Compatible with E Ink ICE evaluation kit »
VA3200-DOA is a reflective electrophoretic E Ink technology display module based on plastic active matrix TFT substrate. It has 4.05” active area with 480 x 720 pixels, and the display is capable to display images with 1-bit black and white content.
Three ICE board generations are developed to support this module
● If you are already in possession of an E Ink ICE kit, please select your driving board information below for us to deliver EPD equipped with right FW ● If you are the first time to buy this evaluation kit. please make sure you are in possession of an E Ink ICE Kit. go to ICE -
42˝ monochrome ePaper Display [VB3300-RBA]【Display Module Only】
$2,500.00(Tax excl.)Read more...VB3200-RBA is a reflective electrophoretic E Ink technology display module based on active matrix TFT substrate. It has 42” active area with 2160 x 2880 pixels and 3:4 accept ratio, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.
Two kinds of kit are developed to support this module
● If you are already in possession of a E Ink Salt kit , please select your kit information below for us to deliver EPD equipped with right FW ● If you are the first time to buy this evaluation kit.
please make sure you are in possession of an E Ink Salt kit ( go to Salt )Notice:
Due to size limitation of module, please refer handling notice to avoid module damage ( go to handling notice ) -
5.65˝ E Ink Gallery Palette ™ 4000 ePaper Display (AB1024-EGA) 【Display Module Only】
$149.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
AB1024-EGA is a reflective electrophoretic E Ink technology display module based on active matrix TFT. It has 5.65” active area with 600 x 448 pixels. The panel is capable of displaying 7-colors of black, white, red, yellow, blue, green, and orange images depending on the associated lookup table used.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware. -
5.65˝ ePaper Display (VC2207-EGA)【Display Module Only】
$149.00(Tax excl.)Read more...« Compatible with E Ink HULK evaluation kit »
VC2207-EGA is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 5.65” and contains 600 x 448 pixels. The panel is capable of displaying 1-bit black/white images depending on the associated lookup table used. The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator, DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.
● Please make sure you are in possession of a E Ink HULK Kit. go to HULK ● Firmware programmer (MSP-EXP430G2) kit is required to update firmware.