Showing 37-48 of 73 results

  • epd-130

    (Tax excl.)

    Advantech EPD-130 are the module integrated with 13.3″ EPD controller The module can support hospital, pharmacy, factory, warehouse and retail application With optimization on the power consumption and device management, your applications can be achieved years battery lifetime and thousand devices connection.
    With advantech EPD-130, system integrator can focus on application development and system management without any obstacle.

    epd module
    epd evk and demokit

    Read more...
  • epd-132

    (Tax excl.)

    Advantech EPD series are the module which support ultralow power 2.4GHz RF wireless protocol integrated with 13.3″ EPD in ARM Cortex-M4 processor. The module can support hospital, pharmacy, factory, warehouse and retail application With optimization on the power consumption and device management, your applications can be achieved years battery lifetime and thousand devices connection.

    Advantech EPD series provide multi interface for application control which is highly integrated with EPD driver and low power consumption system. EPD series device can easily delopy and join network group with WISE-3610W and WISE-3200 (IoT Router and Advantech IoT Gateway). Vetical market data can be quickly and easily acquired and transformed into a different format to communicate with ePaper Manager Server(ARK2250L /ARK1123H). All EPD control have been done by Advantech EPD solution and system integrator can focus on application development and system management without any obstacle.

    epd module
    epd evk and demokit

    Read more...
  • EPS2-C06 (42inch)

    $4,000.00
    (Tax excl.)

     

    CREA EPS (Electronic Paper Signage) is first device with HDMI terminal as EPD for signage.
    Image input is easy with the same operation as the conventional LCD type displays.
    In addition to high image quality and high visibility, electronic paper can maintain display even without a power supply, so it can display with very low power consumption.

    Easy high-definition display : HDMI-in loaded
    Standalone operation : Signage application pre-installed
    Diverting current system : Various interfaces such as USB / LAN / SD card are available
    Slim bezel, Lightweight design

    Go to EPS products 

    This product is VCCI compliant. Importing to countries where different certifications are mandatory may require additional custom clearance process.
    This should be dealt with by recipients of goods according to local import regulations.
    E Ink is not held responsible for any loss, damage and additional cost incurred due to the above mentioned circumstances related any uncertified safety or telecommunication regulations.

    ※ Freight is not included. Freight cost can be provided upon request.

    Read more...
  • EPS2-C07 (32inch)

    $3,000.00
    (Tax excl.)

     

    CREA EPS (Electronic Paper Signage) is first device with HDMI terminal as EPD for signage.
    Image input is easy with the same operation as the conventional LCD type displays.
    In addition to high image quality and high visibility, electronic paper can maintain display even without a power supply, so it can display with very low power consumption.

    Easy high-definition display : HDMI-in loaded
    Standalone operation : Signage application pre-installed
    Diverting current system : Various interfaces such as USB / LAN / SD card are available
    Slim bezel, Lightweight design

    Go to EPS products 

    This product is VCCI compliant. Importing to countries where different certifications are mandatory may require additional custom clearance process.
    This should be dealt with by recipients of goods according to local import regulations.
    E Ink is not held responsible for any loss, damage and additional cost incurred due to the above mentioned circumstances related any uncertified safety or telecommunication regulations.

    ※ Freight is not included. Freight cost can be provided upon request.

    Read more...
  • The MpicoSys TCM2_E312 development kit enables ultra low power applications that make the most of the low-power operation of the E Ink 31.2” display, allowing even a battery operated product with this large display. Power consumption can be as low as 118mJ for a quality 2 bit update. The kit consists of TCM board, Ribbon cables, USB-C cable, USB2TCM interface, Micro-USB cable, E ink ED312TT2 display module and 2 hours of specialistic design-in support (planned, EU hours).

    MpicoSys TCM2-312 driving kit is dedicated for driving ED312TT2 display module (included).

    ORDER

    Read more...
  • The MpicoSys TCM2_E97 development kit enables low power applications that make the most of the low-power operation of the E Ink 9.7” display, allowing battery operated products. Power consumption can be as low as 76 mJ for a quality 2 bit update.

    The kit consists of TCM board, USB2TCM interface, Micro-USB cable, E Ink ED097CT2 display and 2 hours of specialistic design-in support (planned, EU hours).
    MpicoSys TCM2-E97 driving kit is dedicated for driving ED097CT2 display module (included).

    ORDER

    Read more...
  • The MpicoSys TCM2_E133 development kit enables low power applications that make the most of the low-power operation of the E Ink 13.3” display, allowing battery operated products. Power consumption can be as low as 76 mJ for a quality 2 bit update.

    The kit consists of TCM board, USB2TCM interface, Micro-USB cable and 2 hours of specialistic design-in support (planned).

    MpicoSys TCM2_97 driving kit is dedicated for driving ED133UT2 display module.

    ORDER

    Read more...
  • The MpicoSys TCM2_E133 development kit enables low power applications that make the most of the low-power operation of the E Ink 13.3” display, allowing even a battery operated product. Power consumption can be as low as 76mJ for a quality 2 bit update. The kit consists of TCM board, USB2TCM interface, Micro-USB cable, Eink ED133UT2 display and 2 hours of specialistic design-in support (planned, EU hours).
    MpicoSys TCM2-133 driving kit is dedicated for driving ED133UT2 display module (included).

    ORDER

    Read more...
  • The MpicoSys TCM2_E312 development kit enables low power applications that make the most of the low-power operation of the E Ink 31.2” display, allowing even a battery operated product with this large display. Power consumption can be as low as 118mJ for a quality 2 bit update. The kit consists of TCM board, Ribbon cables, USB-C cable, USB2TCM interface, Micro-USB cable and 2 hours of specialistic design-in support (planned, EU hours).

    MpicoSys TCM2-312 driving kit is dedicated for driving E ink ED312TT2 display module (not included).

    ORDER

    Read more...
  • The MpicoSys TCM2_E97 development kit enables low power applications that make the most of the low-power operation of the E Ink 9.7” display, allowing battery operated products. Power consumption can be as low as 76 mJ for a quality 2 bit update.

    The kit consists of TCM board, USB2TCM interface, Micro-USB cable and 2 hours of specialistic design-in support (planned).

    MpicoSys TCM2_97 driving kit is dedicated for driving ED097CT2 display module.

    ORDER

    Read more...
  • HULK Driving Board

    $350.00
    (Tax excl.)

    The Hulk development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use  development kit loading and viewing custom images on E Ink display.

    The software design use common industry standard development environment (IAR Integrated Development Environment (IDE))

    No ePaper display panels included in the package. Please make sure you are in possession of one or more HULK compatible ePaper display panels.
    Firmware update is required for the first use and when different display panels are applied to the driving board.
    Firmware programmer (MSP-EXP430G2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • Hulk with 1.1” ePaper display (ET011TT2) demo kit allows E Ink clients to access the hardware and software of E Ink’s 1.1” flexible, monochrome ePaper display module for evaluation. This kit demonstrates as a turnkey solution for those who are interested in designing with E Ink displays. Hardware and software design support is available from E Ink directly.

    1.1” display panel is suitable for various applications, e.g. Wearable application, etc…

    Read more...