Showing 1-12 of 73 results

  • « Compatible with E Ink HULK evaluation kit »

    ET011TJ2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used. A central hole is in the center of display.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ET011TT2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED013TC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 1.27” active area with 128×256 pixels, the display is capable to display images at 2 gray levels (1 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink SILK evaluation kit »

    ET014TT1 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.43” active area with 128 x 296 pixels, the display is capable to display images at 2 gray levels (1 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink SILK Kit. go to SILK
    Firmware programmer (ST-LINK/V2 ) kit is required to update firmware. Please purchase firmware programmer from Here. (ST-LINK/V2 )
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ES103TC1 is a reflective electrophoretic E Ink® and Mobius technology display module based on active matrix TFT substrate. It has 10.3” active area with 1404 x 1872 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.
    The display module doesn’t contain a touch panel.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ED133UT2 is a reflective electrophoretic E Ink® technology display module based on active matrix TFT substrate. It has 13.3” active area with 1600 x 1200 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file.
    The display module doesn’t contain a touch panel.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ES133UT2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. The Plastic substrate is protected by an outer covering, which is a part of the display. It has 13.3” active area with 1600 x 1200 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.
    The display module doesn’t contain a touch panel.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED029TC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black and white content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    EL029TR1 is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 296 x 128 pixels. The panel is capable of displaying 1-bit black, white and red images depending on the associated lookup table used.

    The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator,DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ET029TC1 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 2.9” active area with 200 x 300 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink SILK evaluation kit »

    ED035OC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 3.5” active area with 360 x 600 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink SILK Kit. go to SILK
    Firmware programmer (ST-LINK/V2 ) kit is required to update firmware. Please purchase firmware programmer from Here. (ST-LINK/V2 )
    Read more...
  • EC312TT2 is a reflective electrophoretic E Ink technology display module based on TFT active matrix with color filter design.. It has 31.2” active area with 2560 x 1440 pixels, the display is capable to display 4096 colors depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink V5 system board. go to V5
    Read more...