Showing 61-69 of 69 results

  • « Compatible with Parrot MSP430 or Beaglebone evaluation kits »

    The 4.9″ Lectum display is a flexible active-matrix EPD with Epson S1D13541 EPD controller and drivers supporting 720 x 120 pixels.

    This display is particularly suitable for wearable applications.

    Please make sure you are in possession of a Parrot MSP430 or Beaglebone kit.

    Go to Parrot MSP430 Evaluation Kit
    Go to Beaglebone Evaluation Kit

    Read more...
  • i.MX6-Kit, suited for high-performance applications such as e-readers, signage and advertisement / information panels. Allows complex functionality like user interaction and fast image processing on-the-fly.
    The MCU ARM Cortex-A9 is a system-on-chip (SoC) solution with the EPD controller integrated. The MCU runs on Linux with EPD frame buffer driver.
    The kit includes the MCU board i.MX6SoloLite and all other components required to operate different display sizes.
    The display sizes suported are 4.7″, 10.7″ and 15.4″.

    In use, the kit allows you to test loading and viewing custom images onto your chosen display.

    No ePaper display panels are included in the package. Please make sure you are in possession of a compatible Plastic Logic display. Go to i.MX6 compatible display panels

    * Please ensure that you select the display type being used with this kit prior to order. Different components may be applicable depending on requirements.

    Read more...
  • The EPD demo kit includes a Raspberry Pi shield board. The Raspberry Pi shield board and E Ink display panel are connected, then need to connect one more Raspberry Pi #3(Buy a set of Raspberry Pi #3 from Digi-Key) via a connector adapter. The Micro USB port on the demo kit supplies data and power to the Raspberry Pi shield board and E Ink panel. Directly connect to power the Raspberry will automatic into slideshow mode to display the default pictures.

    No ePaper display panels included in the package. Please make sure you are in possession of one or more Raspberry Pi shield board compatible ePaper display panels. Go to compatible display panels.(EL029TR1 2.9”)
    Raspberry Pi shield board needed work with Raspberry Pi #3, please reference Digi-Key website https://www.digikey.tw/product-detail/en/raspberry-pi/RASPBERRY-PI-3/1690-1000-ND/6152799?cur=TWD&lang=en
    Read more...
  • SILK Driving Board

    $350
    (Tax excl.)

    The SILK development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.
    The software design use common industry standard development environment (Keil Integrated Development Environment (IDE))

    No ePaper display panels included in the package. Please make sure you are in possession of one or more SILK compatible ePaper display panels.
    Firmware update is required for the first use and when different display panels are applied to the driving board.
    Firmware programmer (ST-LINK/V2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (ST-LINK/V2 )
    Read more...
  • SILK with 1.43” ePaper display (ET014TT1) demo kit allows E Ink clients to access the hardware and software of E Ink’s 1.43” flexible, monochrome ePaper display module for evaluation.  This kit demonstrates as a turnkey solution for those who are interested in designing with E Ink displays. Hardware and software design support is available from E Ink directly.

    1.43” display panel is suitable for various applications, e.g. Wearable application, Smart Card application, etc…

    Read more...
  • SILK with 1.73” ePaper display (ET017QC4) demo kit allows E Ink clients to access the hardware and software of E Ink’s 1.73” flexible, monochrome ePaper display module for evaluation.  This kit demonstrates as a turnkey solution for those who are interested in designing with E Ink displays. Hardware and software design support is available from E Ink directly.

    1.73” display panel is suitable for various applications, e.g. Wearable application, Smart Card application, etc…

    Read more...
  • Urban

    (Tax excl.)

    These 13” greyscale units are optically bonded, with IP 67 casing, UV protection, and optionally LED lighting and a photovoltaic cell. They are very easy to deploy anywhere since they do not require any extensive drilling and permits, wires or connection to the power grid (connectivity can be 3G/wifi and the photovoltaic cell can make the devices self-sustainable).

    With every device comes an already integrated Visionect Software Suite – which supports open API integration of any web-based back-end system – while enabling monitoring features for humidity, battery level, signal strength, temperature etc. It is an enterprise-grade tool built to manage large networks of devices.
    From the Software standpoint – there is a development of a graphical interface needed. A simple piece of software that collects data from the transit file systems (GTFS) and presents it on a website in a user-friendly way. We have also developed a CMS (content management system) which is included in the price.

    Color: Slate Gray

     

    Go to Visionect

    Read more...
  • V5 System Board

    $500
    (Tax excl.)

    V5 is a system board which is developed for controlling reflective electrophoretic E Ink® technology display module. It can support ED312TT2, EC312TT2 and ED420TT1.

    V5 system board provides Wifi, Bluetooth and Ethernet for network. It also provides USB and SD interface for connectivity and storage. This system is built on Linux system. Customers can easily integrate their own software into the system.

    No ePaper display panels included in the package. Please make sure you are in possession of one or more V5 System board compatible ePaper display panels. Go to compatible display panels.
    (EC312TT2 31.2” color)
    (ED312TT2 31.2” monochrome)
    (ED420TT1 42” monochrome)
    Read more...
  • Venus Driving Board

    $200
    (Tax excl.)

    The Venus driving board is a controller kit that allows user to control the E Ink Prism display modules. This controller kit provides micro RS485 inter-connection. It provides the users an easy interface to integrate this controller into their platform/PC.

    The Venus driving board can control following Prism displays :

     

    Read more...