Showing 25-36 of 87 results

  • The V42-OSM uses a 42” reflective E Ink® panel, it is designed for outdoor use and it is ultra-low power, ie suitable for solar power. It has a 42” active display area with 2160 x 2880 pixels, and it is capable of displaying images at up to 16 gray levels.

    The main application is as a Public Information Display.
    The Outdoor Master is designed to operate in full outdoor conditions and has an IP65 rating as well as an IK8 impact rating. The enclosure is aluminum, with an AR treated optically bonded cover glass; the result is a display system with excellent temperature performance and protection against humidity, UV and IR radiation. The enclosure minimizes the solar load thus enabling use 24/7/365 outdoors and in full sun.

    The display is readable even in bright environments and with direct sunlight on the front of the screen. In addition the integrated front light offers illumination during the night. It can be used in portrait or landscape mode depending on the mounting method and image content. On the back of the display there are the power and signal connections as well as the VESA standard mounting holes.

    42” Outdoor E-Paper Display

  • « Compatible with E Ink HULK evaluation kit »

    AB1024-EGA is a reflective electrophoretic E Ink technology display module based on active matrix TFT. It has 5.65” active area with 600 x 448 pixels. The panel is capable of displaying 7-colors of black, white, red, yellow, blue, green, and orange images depending on the associated lookup table used.

     

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware.
  • « Compatible with E Ink HULK evaluation kit »

    VC2207-EGA is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 5.65” and contains 600 x 448 pixels. The panel is capable of displaying 1-bit black/white images depending on the associated lookup table used. The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator, DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.

     

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware.

     

  • « Compatible with E Ink ICE evaluation kit »

    ED060KC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 6” active area with 1072 x 1448 pixels, and the display is capable to display images at 2-16 gray levels (1-4 bit) depending on the display controller and the associated waveform file it used.

    Please Note: Driving boards are not included in the display module package. Three versions firmware had been developed with ICE board to support this module.

    Please follow the ordering steps in order for us to prepare your evaluation kit correctly.

    This is your first time purchasing this display panel module

    Step 1: You need to purchase a driving board. Learn and order your driving boards, please go to E Ink ICE kit ( go to ICE  )

    Step 2: While you are placing order for your ICE driving board, please select the display module size you would like to purchase from the drop-down list on the bottom of  ICE board webpage  before placed it in Shopping Cart.

    Step 3: After placing ICE board in Shopping Cart, return to this webpage and select the ICE board with the correct firmware version (number in the bracket) from the drop-down list that matches the ICE board you just placed in the Shopping Cart.

    You are already in possession of an E Ink ICE kit, only want to purchase a display panel module

    Please select the ICE board with correct firmware version (number in the bracket) which you are in possession with from the Driving Board drop-down list below. This will help us to prepare your display panel module with the correct firmware.

  • Pre Order

    Shipping Date : 31th Jul., 2022

    « Compatible with E Ink MeeNote evaluation kit »

    SC1452-FOA is a 6-inch color (E Ink Kaleido™ Plus), reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It offers 16 levels of grayscale and is capable of displaying 4096 colors. Embedded with on-cell glass touch and front light illumination.
    E Ink Kaleido Plus, the new generation in the Kaleido family based on E Ink Print Color technology, offers a better color balance and higher contact ratio. SC1452-FOA is equipped with new image rendering algorithms allowing for crisper text. In addition, the front light is optimized for minimal color blending, offering enhanced reading and viewing experience.
    By applying SC1452-FOA with MeeNote development kit (driving board + accessories) enables you to develop innovative applications that benefit from low-power consumption of ePaper displays. It features simple installation and quick tryout for the desired applications. One can use development kit to load and view custom images on E Ink display with a PC or a laptop. Learn more about MeetNote driving board.
    This model is suitable for the applications of eReader, eNote, promotion signage.

     

    Please be noted:

    Driving board and accessory are not included in the display module package. Please purchase a MeeNote driving board package and MeeNote Accessory package for SC1452-FOA
    If you are already in possession of a MeeNote driving board, please make sure you have matching accessories (MeeNote Accessory package for )
  • The main feature is It use high resolution E Ink panel, one thousand seventy two by one thousand four hundred forty eight pixel. It include front light and touch screen. For ID, we use two different texture on back cover, it means you can hold by one hand. We build in a one point eight giga heze quad core processor to run Android eleven. It has a two thousand mah battery capacity, it’s the largest battery capacity with the other competitor. We keep tradition headphone jack, it easy to read audio book for children. In SW, we develop EPD virtual keyboard base on ePaper screen. Android original keyboard isn’t suitable for two color ePaper. We also provide on/off line text to speech function, user can read audio book off line.

  •  « Compatible with E Ink THOR evaluation kit »

    EB2000-GCA is a 7.3-inch color (E Ink Spectra 3100TM ), reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It offers 4 colors of black, white, yellow and red images.

    E Ink Spectra 3100, bright and saturated color combinations contributed by 4 –Pigments system for creative promotion and faster update time, wide temperature range to accommodate more needs. High resolution (127 ppi) to display more content to attract consumer’s attention.

    By applying EB2000-GCA with Thor development kit (driving board + accessories) enables you to develop innovative applications that benefit from low-power consumption of ePaper displays. It features simple installation and quick tryout for the desired applications. One can use development kit to load and view custom images on E Ink display with a PC or a laptop. Learn more about Thor driving board.

    This model is suitable for the applications of ESL.

     

    Please be noted:

     Driving board and accessory are not included in the display module package. Please purchase a Thor driving board package and Thor Accessory package for EB2000-GCA
     If you are already in possession of a Thor driving board, please make sure you have matching accessories (Thor Accessory package for EB2000-GCA)
  • « Compatible with E Ink ICE evaluation kit »

    VB3300-GHA is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 7.8” active area with 1404 x 1872 pixels, and the display is capable to display images at 2-16 gray levels (1-4 bit) depending on the display controller and the associated waveform file it used.

    Please Note: Driving boards are not included in the display module package. Three versions firmware had been developed with ICE board to support this module.

    Please follow the ordering steps in order for us to prepare your evaluation kit correctly.

    This is your first time purchasing this display panel module

    Step 1: You need to purchase a driving board. Learn and order your driving boards, please go to E Ink ICE kit ( go to ICE  )

    Step 2: While you are placing order for your ICE driving board, please select the display module size you would like to purchase from the drop-down list on the bottom of  ICE board webpage  before placed it in Shopping Cart.

    Step 3: After placing ICE board in Shopping Cart, return to this webpage and select the ICE board with the correct firmware version (number in the bracket) from the drop-down list that matches the ICE board you just placed in the Shopping Cart.

    You are already in possession of an E Ink ICE kit, only want to purchase a display panel module

    Please select the ICE board with correct firmware version (number in the bracket) which you are in possession with from the Driving Board drop-down list below. This will help us to prepare your display panel module with the correct firmware.

     

  • Pre Order

    Shipping Date : 31th Jul., 2022

    « Compatible with E Ink MeeNote evaluation kit »

    SC1452-GHA is a 7.8-inch color (E Ink Kaleido™ Plus), reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It offers 16 levels of grayscale and is capable of displaying 4096 colors. Embedded with film touch and front light illumination.
    E Ink Kaleido Plus, the new generation in the Kaleido family based on E Ink Print Color technology, offers a better color balance and higher contact ratio. SC1452-GHA is equipped with new image rendering algorithms allowing for crisper text. In addition, the front light is optimized for minimal color blending, offering enhanced reading and viewing experience.
    By applying SC1452-GHA with MeeNote development kit (driving board + accessories) enables you to develop innovative applications that benefit from low-power consumption of ePaper displays. It features simple installation and quick tryout for the desired applications. One can use development kit to load and view custom images on E Ink display with a PC or a laptop. Learn more about MeetNote driving board.
    This model is suitable for the applications of eReader, eNote, promotion signage.

     

    Please be noted:

    Driving board and accessory are not included in the display module package. Please purchase a MeeNote driving board package and MeeNote Accessory package for SC1452-FOA
    If you are already in possession of a MeeNote driving board, please make sure you have matching accessories (MeeNote Accessory package for )
  • « Compatible with E Ink Thor evaluation kit »

    EB2000-HAA is a 8.14-inch color (E Ink Spectra 3100TM), reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It offers 4 colors of black, white, yellow and red images.

    E Ink Spectra 3100, bright and saturated color combinations contributed by 4 –Pigments system for creative promotion and faster update time, wide temperature range to accommodate more needs. High resolution (144 ppi) to display more content to attract consumer’s attention.

    By applying EB2000-HAA with Thor development kit (driving board + accessories) enables you to develop innovative applications that benefit from low-power consumption of ePaper displays. It features simple installation and quick tryout for the desired applications. One can use development kit to load and view custom images on E Ink display with a PC or a laptop. Learn more about Thor driving board.

    This model is suitable for the applications of ESL.

     

    Please be noted:

    Driving board and accessory are not included in the display module package. Please purchase a Thor driving board package and Thor Accessory package for EB2000-HAA
    If you are already in possession of a Thor driving board, please make sure you have matching accessories (Thor Accessory package for EB2000-HAA)

     

     

  • « Compatible with E Ink ICE evaluation kit »

    VB3300-JGA is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 9.7” active area with 1200 x 825 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please Note: Driving boards are not included in the display module package. Three versions firmware had been developed with ICE board to support this module.

    Please follow the ordering steps in order for us to prepare your evaluation kit correctly.

    This is your first time purchasing this display panel module

    Step 1: You need to purchase a driving board. Learn and order your driving boards, please go to E Ink ICE kit ( go to ICE  )

    Step 2: While you are placing order for your ICE driving board, please select the display module size you would like to purchase from the drop-down list on the bottom of  ICE board webpage  before placed it in Shopping Cart.

    Step 3: After placing ICE board in Shopping Cart, return to this webpage and select the ICE board with the correct firmware version (number in the bracket) from the drop-down list that matches the ICE board you just placed in the Shopping Cart.

    You are already in possession of an E Ink ICE kit, only want to purchase a display panel module

    Please select the ICE board with correct firmware version (number in the bracket) which you are in possession with from the Driving Board drop-down list below. This will help us to prepare your display panel module with the correct firmware.

  • The 9.7-inch PoE ePaper sign is designed for a greener and more sustainable future in interior design. The aesthetically pleasing devices feature a 13.3-inch E Ink display, RFID/NFC and touch buttons for local interaction, Power over Ethernet (PoE) for minimal maintenance, a central management server (CMS) for managing hundreds of devices, and an API for custom integrations with third party applications.

    The solution is designed for permanently installed indoor signage solutions, e.g. multilingual exhibitions at museums, patient information systems in hospitals and information boards, schedules in offices and universities, or menus in restaurants. However, system integrators are not limited to existing solutions, as the flexibility of the platform enables the creation of novel applications.

    Go to Tint Technologies