Showing 13-24 of 77 results

  • SB1452-QAA is a reflective electrophoretic E Ink technology display module based on TFT active matrix with color filter design.. It has 31.2” active area with 1280 x 720 pixels, the display is capable to display 4096 colors depending on the display controller and the associated waveform file it used.

    Please Note: Driving boards are not included in the display module package.  E Ink Salt kit is designed to support this module( go to Salt ).

    Notice:
    Due to size limitation of module, please refer handling notice to avoid module damage ( go to handling notice )

  • VA3200-QAA is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 31.2” active area with 2560 x 1440 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please Note: Driving boards are not included in the display module package.  E Ink Salt kit is designed to support this module( go to Salt ).

    Notice:
    Due to size limitation of module, please refer handling notice to avoid module damage ( go to handling notice )

  • The V32-OSM uses a 31.2” reflective E Ink® panel, it is designed for outdoor use and it is ultra-low power, ie suitable for solar power. It has a 31.2” active display area with 2560 x 1440 pixels, and it is capable of displaying images up to 16 grey levels.

    The main application is as a Public Information Display.
    The V32-OSM is designed to operate in full outdoor conditions and has an IP65 rating as well as an IK8 impact rating. The enclosure is aluminum, with an AR treated optically bonded cover glass; the result is a display system with excellent temperature performance and protection against humidity, UV and IR radiation. The enclosure minimizes the solar load thus enabling use 24/7/365 outdoors and in full sun.

    The display is readable even in bright environments and with direct sunlight on the front of the screen. In addition the integrated front light offers illumination during the night. It can be used in portrait or landscape mode depending on the mounting method and image content. On the back of the display there are the power and signal connections as well as the VESA standard mounting holes.

     

    32” Outdoor E-Paper Display

  • SC396T31P1 is a 39.6” Prism display with dark blue / white colors. Prism is a flexible sheet and base on E Ink’s Electrophoresis display technology. Both sides of the Prism display a color. The displayed color could be switched between Dark Blue and White. The user could apply the Venus driving board to control it. It supports two color changing effects: waving and flashing. The Prism display is suitable for various applications such as advertisement and decoration.

    ● Please make sure you are in possession of a E Ink Venus. go to Venus

    See all the links
    NEOCON Viva Wovin Wall
    NEOCON Viva Profile Wall

  • SC396T31P1 is a 39.6” Prism display with dark blue / white colors. Prism is a flexible sheet and base on E Ink’s Electrophoresis display technology. Both sides of the Prism display a color. The displayed color could be switched between Dark Blue and White. The user could apply the Venus driving board to control it. It supports two color changing effects: waving and flashing. The Prism display is suitable for various applications such as advertisement and decoration.

    ● Please make sure you are in possession of a E Ink Venus. go to Venus

    See all the links
    NEOCON Viva Wovin Wall
    NEOCON Viva Profile Wall

  • SC396T35P1 is a 39.6” Prism display with yellow / white colors. Prism is a flexible sheet and base on E Ink’s Electrophoresis display technology. Both sides of the Prism display a color. The displayed color could be switched between Yellow and White. The user could apply the Venus driving board to control it. It supports two color changing effects: waving and flashing. The Prism display is suitable for various applications such as advertisement and decoration.

    ●Please make sure you are in possession of a E Ink Venus. go to Venus

    See all the links
    ● NEOCON Viva Wovin Wall
    ● NEOCON Viva Profile Wall

  • VB3200-RBA is a reflective electrophoretic E Ink technology display module based on active matrix TFT substrate. It has 42” active area with 2160 x 2880 pixels and 3:4 aspect ratio, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please Note: Driving boards are not included in the display module package.  E Ink Salt kit is designed to support this module( go to Salt ).

    Notice:
    Due to size limitation of module, please refer handling notice to avoid module damage ( go to handling notice )

  • $2500

    « Compatible with Avalue EMX-IMX7 driving board »

    42″ EPD-42T Communication Board is a reflective electrophoretic E Ink technology display on an active matrix TFT substrate with PCAP touch (SNW, Silver Nano-Wire) design and is supported for 10-points multi-touch function. The diagonal length of the active area is 42″ and contains 2160 x 2880 pixels. The panel is capable of displaying images at 2 to 16 gray levels (1 to 4 bits) black/white image and able to operate between 0°C and 50°C.

    42″ EPD-42T Communication Board supports for both Linux and Android (5.1) systems. With suitable SDK, you can bulid APPs on each platform for desired EPD experience.

    Go to EPD-42T

  • The V42-OSM uses a 42” reflective E Ink® panel, it is designed for outdoor use and it is ultra-low power, ie suitable for solar power. It has a 42” active display area with 2160 x 2880 pixels, and it is capable of displaying images at up to 16 gray levels.

    The main application is as a Public Information Display.
    The Outdoor Master is designed to operate in full outdoor conditions and has an IP65 rating as well as an IK8 impact rating. The enclosure is aluminum, with an AR treated optically bonded cover glass; the result is a display system with excellent temperature performance and protection against humidity, UV and IR radiation. The enclosure minimizes the solar load thus enabling use 24/7/365 outdoors and in full sun.

    The display is readable even in bright environments and with direct sunlight on the front of the screen. In addition the integrated front light offers illumination during the night. It can be used in portrait or landscape mode depending on the mounting method and image content. On the back of the display there are the power and signal connections as well as the VESA standard mounting holes.

    42” Outdoor E-Paper Display

  • « Compatible with E Ink Concerto evaluation kit »

    VB3300-EBA is a reflective electrophoretic E Ink® technology display module based on active matrix TFT substrate. It has 5.17” active area with 720 x 1280 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink Concerto Kit. go to Concerto
  • « Compatible with E Ink HULK evaluation kit »

    AB1024-EGA is a reflective electrophoretic E Ink technology display module based on active matrix TFT. It has 5.65” active area with 600 x 448 pixels. The panel is capable of displaying 7-colors of black, white, red, yellow, blue, green, and orange images depending on the associated lookup table used.

     

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware.
  • « Compatible with E Ink HULK evaluation kit »

    VC2207-EGA is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 5.65” and contains 600 x 448 pixels. The panel is capable of displaying 1-bit black/white images depending on the associated lookup table used. The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator, DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.

     

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware.