Showing 1-12 of 20 results

  • « Compatible with E Ink HULK evaluation kit »

    ET011TT2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED013TC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 1.27” active area with 128×256 pixels, the display is capable to display images at 2 gray levels (1 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink SILK evaluation kit »

    ET014TT1 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.43” active area with 128 x 296 pixels, the display is capable to display images at 2 gray levels (1 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink SILK Kit. go to SILK
    Firmware programmer (ST-LINK/V2 ) kit is required to update firmware. Please purchase firmware programmer from Here. (ST-LINK/V2 )
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ED133UT2 is a reflective electrophoretic E Ink® technology display module based on active matrix TFT substrate. It has 13.3” active area with 1600 x 1200 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ES133UT2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 13.3” active area with 1600 x 1200 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED020OC4 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.0” active area with 94 x 230 pixels, and the display is capable to display images with black, white, and red content depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED020OC5 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2” active area with 94 x 230 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED029TC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black and white content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    EL029TR1 is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 2.9” and contains 296 x 128 pixels. The panel is capable of displaying 1-bit black, white and red images depending on the associated lookup table used.

    The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator,DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ET029TC1 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 2.9” active area with 200 x 300 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink SILK evaluation kit »

    ED035OC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 3.5” active area with 360 x 600 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink SILK Kit. go to SILK
    Firmware programmer (ST-LINK/V2 ) kit is required to update firmware. Please purchase firmware programmer from Here. (ST-LINK/V2 )
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ET040TC2 is a reflective electrophoretic E Ink technology display module based on plastic active matrix TFT substrate. It has 4.05” active area with 480 x 720 pixels, and the display is capable to display images with 1-bit black and white content.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...