Showing all 12 results

  • « Compatible with E Ink HULK evaluation kit »

    ET011TT2 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.1” active area with 240 x 240 pixels, and the display is capable to display images at 4 gray levels (2 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED013TC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 1.27” active area with 128×256 pixels, the display is capable to display images at 2 gray levels (1 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink SILK evaluation kit »

    ET014TT1 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 1.43” active area with 128 x 296 pixels, the display is capable to display images at 2 gray levels (1 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink SILK Kit. go to SILK
    Firmware programmer (ST-LINK/V2 ) kit is required to update firmware. Please purchase firmware programmer from Here. (ST-LINK/V2 )
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED020OC5 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2” active area with 94 x 230 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED020OC4 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.0” active area with 94 x 230 pixels, and the display is capable to display images with black, white, and red content depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED029TC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black and white content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED029TC3 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 2.9” active area with 296 x 128 pixels, and the display is capable to display images with black, white, and red content. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, RAM, LUT, VCOM, and border are supplied with each panel.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ET029TC1 is a reflective electrophoretic E Ink technology display module based on active matrix TFT and plastic substrate. It has 2.9” active area with 200 x 300 pixels, the display is capable to display images at 1-bit depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink SILK evaluation kit »

    ED035OC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 3.5” active area with 360 x 600 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink SILK Kit. go to SILK
    Firmware programmer (ST-LINK/V2 ) kit is required to update firmware. Please purchase firmware programmer from Here. (ST-LINK/V2 )
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ED047TC2 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 4.7” active area with 540 x 960 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • SILK with 1.43” ePaper display (ET014TT1) demo kit allows E Ink clients to access the hardware and software of E Ink’s 1.43” flexible, monochrome ePaper display module for evaluation.  This kit demonstrates as a turnkey solution for those who are interested in designing with E Ink displays. Hardware and software design support is available from E Ink directly.

    1.43” display panel is suitable for various applications, e.g. Wearable application, Smart Card application, etc…

    Read more...
  • SILK with 1.73” ePaper display (ET017QC4) demo kit allows E Ink clients to access the hardware and software of E Ink’s 1.73” flexible, monochrome ePaper display module for evaluation.  This kit demonstrates as a turnkey solution for those who are interested in designing with E Ink displays. Hardware and software design support is available from E Ink directly.

    1.73” display panel is suitable for various applications, e.g. Wearable application, Smart Card application, etc…

    Read more...