Showing 25-36 of 50 results

  • ED420TT1 is a reflective electrophoretic E Ink technology display module based on active matrix TFT substrate. It has 42” active area with 2160 x 2880 pixels and 3:4 accept ratio, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink V5 system board. go to V5
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ED052TC2 is a reflective electrophoretic E Ink® technology display module based on active matrix TFT substrate. It has 5.17” active area with 540 x 960 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED057TC2 is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 5.65” and contains 600 x 448 pixels. The panel is capable of displaying 1-bit black/white images depending on the associated lookup table used. The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator, DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.

     

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink HULK evaluation kit »

    ED057TC6 is a reflective electrophoretic E Ink technology display module on an active matrix TFT substrate. The diagonal length of the active area is 5.65” and contains 600 x 448 pixels. The panel is capable of displaying 1-bit black, white and red images depending on the associated lookup table used. The circuitry on the panel includes an integrated gate and source driver, timing controller, oscillator, DC-DC boost circuit, and memory to store the frame buffer and lookup tables, and additional circuitry to control VCOM and BORDER settings.

     

    Please make sure you are in possession of a E Ink HULK Kit. go to HULK
    Firmware programmer (MSP-EXP430G2) kit is required to update firmware. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ED060KC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 6” active area with 1072 x 1448 pixels, and the display is capable to display images at 2-16 gray levels (1-4 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • « Compatible with E Ink CONCERTO evaluation kit »

    ED060XH8 is a reflective electrophoretic E Ink®technology display module based on active matrix TFT substrate featuring capacitive touch panel with front light. It has 6” active area with 758 x 1024 pixels, the display is capable to display images at 2-16 grey levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink CONCERTO Driving Board. go to CONCERTO
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ED068TG1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 6.8” active area with 1440 x 1080 pixels, and the display is capable to display images at 2-16 gray levels (1-4 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ED078KC1 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 7.8” active area with 1404 x 1872 pixels, and the display is capable to display images at 2-16 gray levels (1-4 bit) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • « Compatible with E Ink ICE evaluation kit »

    ED097TC2 is a reflective electrophoretic E Ink technology display module based on glass active matrix TFT substrate. It has 9.7” active area with 1200 x 825 pixels, the display is capable to display images at 2-16 gray levels (1-4 bits) depending on the display controller and the associated waveform file it used.

    Please make sure you are in possession of a E Ink ICE Kit. go to ICE
    Read more...
  • « Pre-ordered item is scheduled to ship in December »

    The Arduino development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.
    The software design use common industry standard development environment.

    No ePaper display panels included in the package. Please make sure you are in possession of one or more Arduino driving board compatible ePaper display panels. Go to compatible display panels.(EL029TR1 2.9”)
    Read more...
  • CONCERTO Driving Board

    $350
    (Tax excl.)

    The CONCERTO development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use development kit loading and viewing custom images on E Ink display.

    The CONCERTO development kit is included the touch and front light function, which provides a multi-functional E Ink display reference design for customers. The software design use common industry standard development environment (USB interface).

    No ePaper display panels included in the package. Please make sure you are in possession of one or more CONCERTO compatible ePaper display panels. Go to CONCERTO compatible display panels
    Firmware update is required for the first use and when different display panels are applied to the driving board.
    Read more...
  • HULK Driving Board

    $350
    (Tax excl.)

    The Hulk development kit enables you to develop high-performance applications that benefit from low-power operation. It features the easy installation and easy tryout on applications desired. You can use  development kit loading and viewing custom images on E Ink display.

    The software design use common industry standard development environment (IAR Integrated Development Environment (IDE))

    No ePaper display panels included in the package. Please make sure you are in possession of one or more HULK compatible ePaper display panels. Go to HULK compatible display panels
    Firmware update is required for the first use and when different display panels are applied to the driving board.
    Firmware programmer (MSP-EXP430G2) kit is required to perform firmware update. Please purchase firmware programmer from Here. (MSP-EXP430G2)
    Read more...